コグノスケ

menuconfigで手修正する箇所

$ ninja menuconfig

Architecture (x86 architecture)  --->
  ( ) RISCV architectureを選択

SoC/CPU/Configuration Selection (LiteX VexRiscv system implementation)  --->
  ( ) SiFive Freedom SOC implementationを選択

menuconfigで手修正後のビルド

$ ninja

zephyr/samples/hello_world/src/main.c:12:30: error: 'CONFIG_BOARD' undeclared (first use in this function); did you mean 'CONFIG_ARCH'?
  printk("Hello World! %s\n", CONFIG_BOARD);
                              ^~~~~~~~~~~~
                              CONFIG_ARCH

...

In file included from ../include/devicetree.h:12,
                 from ../soc/riscv/riscv-privilege/sifive-freedom/soc.h:15,
                 from ../include/arch/riscv/arch.h:25, 
                 from ../include/arch/cpu.h:23,
                 from ../include/kernel_includes.h:34, 
                 from ../include/kernel.h:17,
                 from zephyr/drivers/interrupt_controller/intc_plic.c:13:
zephyr/drivers/interrupt_controller/intc_plic.c: In function 'riscv_plic_irq_enable':
zephyr/include/generated/devicetree_fixups.h:8:25: error: 'DT_INST_0_SIFIVE_PLIC_1_0_0_IRQ_EN_BASE_ADDRESS' undeclared (first use in this function)
 #define DT_PLIC_IRQ_EN  DT_INST_0_SIFIVE_PLIC_1_0_0_IRQ_EN_BASE_ADDRESS
                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

...

Kconfig.defconfig

# SPDX-License-Identifier: Apache-2.0

if BOARD_HOGE

config BOARD
	default "hoge"

endif

hoge.dts

/* SPDX-License-Identifier: Apache-2.0 */

/dts-v1/;

#include <riscv32-fe310.dtsi>

/ {
	model = "Hoge Board";
	compatible = "hoge,hoge";

	chosen {
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,sram = &dtim;
		zephyr,flash = &flash0;
	};
};

&gpio0 {
	status = "okay";
};

&uart0 {
	status = "okay";
	current-speed = <115200>;
	clock-frequency = <16000000>;
};

&spi0 {
	status = "okay";

	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x10014000 0x1000 0x20400000 0xc00000>;
	flash0: flash@0 {
		compatible = "issi,is25lp128", "jedec,spi-nor";
		size = <134217728>;
		label = "FLASH0";
		jedec-id = [96 60 18];
		reg = <0>;
		// Dummy entry
		spi-max-frequency = <0>;
	};
};

デバイスツリー定義後のビルドエラー

$ ninja

...

riscv64-zephyr-elf/bin/ld: zephyr/arch/arch/riscv/core/libarch__riscv__core.a(isr.S.obj): in function `.L0 ':
zephyr/arch/riscv/core/isr.S:244: undefined reference to `_sw_isr_table'
riscv64-zephyr-elf/bin/ld: zephyr/kernel/libkernel.a(sched.c.obj): in function `z_reset_time_slice':
zephyr/kernel/sched.c:276: undefined reference to `z_clock_elapsed'
riscv64-zephyr-elf/bin/ld: zephyr/kernel/libkernel.a(timeout.c.obj): in function `elapsed':
zephyr/kernel/timeout.c:69: undefined reference to `z_clock_elapsed'
collect2: error: ld returned 1 exit status
%
ninja: build stopped: subcommand failed.

コンフィグ追加

General Architecture Options  --->
  Interrupt Configuration  --->
    [ ] Use generated IRQ tablesを選択

General Kernel Options  --->
  [ ] Execute in place

Device Drivers  --->
  [ ] Serial Drivers  ----
    [ ] Enable UART Interrupt supportを選択
    [ ] SiFive Freedom serial driver (NEW)  ----
      [ ] Enable SIFIVE Port 0 (NEW)  ---- を選択

  [ ] Console drivers  ---
    [ ] Use UART for console (NEW) を選択

  Timer Drivers  --->
    [ ] RISCV Machine Timerを選択

  [ ] GPIO Drivers  ----
    [ ] SiFive Freedom Processor GPIO driver (NEW)  ---- を選択

  [ ] Enable board pinmux driver  ----
    [ ] SiFive Freedom SOC pinmux driver (NEW)  ----

コンフィグ追加後、ビルド＆実行

$ ninja

...

Memory region         Used Size  Region Size  %age Used
             ROM:       13165 B        12 MB      0.10%
             RAM:        3808 B        16 KB     23.24%
        IDT_LIST:         569 B         2 KB     27.78%
[98/98] Linking C executable zephyr/zephyr.elf

$ /usr/bin/qemu-system-riscv32 -nographic -machine sifive_e -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel /home/katsuhiro/share/projects/oss/zephyr/build/zephyr/zephyr.elf

*** Booting Zephyr OS build zephyr-v2.1.0-1471-g7e7a4426d835  ***
Hello World! hoge

存在しないボードを指定したときの、ボード一覧

$ cmake -G Ninja -DBOARD=hoge ../samples/hello_world/

-- Zephyr version: 2.1.99
-- Found PythonInterp: /usr/bin/python3 (found suitable version "3.7.6", minimum required is "3.6")
-- Selected BOARD hoge
No board named 'hoge' found
see usage:

...

Supported Boards:

...

  riscv:
    hifive1
    hifive1_revb
    litex_vexriscv
    m2gl025_miv
    qemu_riscv32
    qemu_riscv64
    rv32m1_vega_ri5cy
    rv32m1_vega_zero_riscy
  x86:
    acrn
    gpmrb
    minnowboard
    qemu_x86_64
    qemu_x86_coverage
    qemu_x86
    qemu_x86_nommu
    up_squared

...

ボード一覧を調べている箇所

# zephyr/cmake/app/boilerplate.cmake

...

foreach(root ${BOARD_ROOT})
  # NB: find_path will return immediately if the output variable is
  # already set
  find_path(BOARD_DIR
    NAMES ${BOARD}_defconfig
    PATHS ${root}/boards/*/*
    NO_DEFAULT_PATH
    )
  if(BOARD_DIR AND NOT (${root} STREQUAL ${ZEPHYR_BASE}))
    set(USING_OUT_OF_TREE_BOARD 1)
  endif()

...

defconfigを足した後のボード一覧

$ mkdir boards/riscv/hoge
$ touch boards/riscv/hoge/hoge_defconfig

$ cmake -G Ninja -DBOARD=hoge2 ../samples/hello_world/

...

  riscv:
    hifive1
    hifive1_revb
    hoge        ★hogeが出てきた★
    litex_vexriscv
    m2gl025_miv
    qemu_riscv32
    qemu_riscv64
    rv32m1_vega_ri5cy
    rv32m1_vega_zero_riscy

...

defconfigを足した後のcmake

$ cmake -G Ninja -DBOARD=hoge ../samples/hello_world/

-- Zephyr version: 2.1.99
-- Selected BOARD hoge
Parsing zephyr/Kconfig
zephyr/scripts/kconfig/kconfig.py: Kconfig.zephyr:26: 'zephyr/boards/riscv/hoge/Kconfig.defconfig' not found (in 'source "$(BOARD_DIR)/Kconfig.defconfig"'). Check that environment variables are set correctly (e.g. $srctree, which is set to 'zephyr'). Also note that unset environment variables expand to the empty string.
CMake Error at zephyr/cmake/kconfig.cmake:214 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/app/boilerplate.cmake:461 (include)
  CMakeLists.txt:5 (include)

-- Configuring incomplete, errors occurred!

Kconfig.defconfig, Kconfig.boardを足した後のcmake

$ touch boards/riscv/hoge/Kconfig.defconfig
$ touch boards/riscv/hoge/Kconfig.board

$ cmake -G Ninja -DBOARD=hoge ../samples/hello_world/

-- Zephyr version: 2.1.99
-- Found PythonInterp: /usr/bin/python3 (found suitable version "3.7.6", minimum required is "3.6")
-- Selected BOARD hoge
Parsing zephyr/Kconfig
Loaded configuration 'zephyr/boards/riscv/hoge/hoge_defconfig'
Merged configuration 'zephyr/samples/hello_world/prj.conf'

warning: <choice> (defined at boards/Kconfig:19) defined with type unknown

error: Aborting due to non-whitelisted Kconfig warning 'warning: <choice> (defined at boards/Kconfig:19)
defined with type unknown'. If this warning doesn't point to an actual problem, you can add it to
the whitelist at the top of zephyr/scripts/kconfig/kconfig.py.

CMake Error at zephyr/cmake/kconfig.cmake:214 (message):
  command failed with return code: 1
Call Stack (most recent call first):
  zephyr/cmake/app/boilerplate.cmake:461 (include)
  CMakeLists.txt:5 (include)


-- Configuring incomplete, errors occurred!

エラーを出しているkconfig.cmake

# zephyr/cmake/kconfig.cmake

execute_process(
  COMMAND
  ${PYTHON_EXECUTABLE}
  ${ZEPHYR_BASE}/scripts/kconfig/kconfig.py
  ${input_configs_are_handwritten}
  ${KCONFIG_ROOT}
  ${DOTCONFIG}
  ${AUTOCONF_H}
  ${PARSED_KCONFIG_SOURCES_TXT}
  ${input_configs}
  WORKING_DIRECTORY ${APPLICATION_SOURCE_DIR}
  # The working directory is set to the app dir such that the user
  # can use relative paths in CONF_FILE, e.g. CONF_FILE=nrf5.conf
  RESULT_VARIABLE ret
  )
if(NOT "${ret}" STREQUAL "0")
  message(FATAL_ERROR "command failed with return code: ${ret}")
endif()

choiceのエラーの原因

# boards/Kconfig

...

# Note: $BOARD_DIR might be a glob pattern

choice
	prompt "Board Selection"

source "$(BOARD_DIR)/Kconfig.board"    ★このファイルが空★

endchoice

Kconfig.boardを書き換え

# SPDX-License-Identifier: Apache-2.0
 
config BOARD_HOGE
	bool "Hoge target"
	depends on SOC_RISCV_SIFIVE_FREEDOM

Kconfig.boardを書き換えた後にcmake実行

$ cmake -G Ninja -DBOARD=hoge ../samples/hello_world/

-- Zephyr version: 2.1.99
-- Found PythonInterp: /usr/bin/python3 (found suitable version "3.7.6", minimum required is "3.6")
-- Selected BOARD hoge
Parsing zephyr/Kconfig
Loaded configuration 'zephyr/boards/riscv/hoge/hoge_defconfig'
Merged configuration 'zephyr/samples/hello_world/prj.conf'
Configuration saved to 'zephyr/build/zephyr/.config'
-- The C compiler identification is GNU 8.3.0
-- The CXX compiler identification is GNU 8.3.0
-- The ASM compiler identification is GNU
-- Found assembler: /home/katsuhiro/x-tools/riscv64-zephyr-elf/bin/riscv64-zephyr-elf-gcc
-- Cache files will be written to: /home/katsuhiro/.cache/zephyr
-- Configuring done
-- Generating done
-- Build files have been written to: zephyr/build


$ ninja

[0/1] Re-running CMake...
-- Zephyr version: 2.1.99
-- Selected BOARD hoge
Parsing zephyr/Kconfig
Loaded configuration 'zephyr/build/zephyr/.config'
No change to 'zephyr/build/zephyr/.config'
-- Cache files will be written to: /home/katsuhiro/.cache/zephyr
-- Configuring done
-- Generating done
-- Build files have been written to: zephyr/build
[5/83] Building C object zephyr/CMakeFiles/offsets.dir/arch/riscv/core/offsets/offsets.c.obj
FAILED: zephyr/CMakeFiles/offsets.dir/arch/riscv/core/offsets/offsets.c.obj
ccache /home/katsuhiro/x-tools/riscv64-zephyr-elf/bin/riscv64-zephyr-elf-gcc -DBUILD_VERSION=zephyr-v2.1.0-1471-g7e7a4426d835 -DKERNEL -D_FORTIFY_SOURCE=2 -D__ZEPHYR__=1 -I../kernel/include -I../arch/riscv/include -I../include -Izephyr/include/generated -I../soc/riscv/litex-vexriscv -isystem ../lib/libc/minimal/include -isystem /home/katsuhiro/x-tools/riscv64-zephyr-elf/lib/gcc/riscv64-zephyr-elf/8.3.0/include -isystem /home/katsuhiro/x-tools/riscv64-zephyr-elf/lib/gcc/riscv64-zephyr-elf/8.3.0/include-fixed -Os -imacroszephyr/build/zephyr/include/generated/autoconf.h -ffreestanding -fno-common -g -mabi=ilp32 -march=rv32ima -imacroszephyr/include/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wno-main -Wno-pointer-sign -Wpointer-arith -Wno-unused-but-set-variable -Werror=implicit-int -fno-asynchronous-unwind-tables -fno-pie -fno-pic -fno-strict-overflow -fno-reorder-functions -fno-defer-pop -fmacro-prefix-map=zephyr/samples/hello_world=CMAKE_SOURCE_DIR -fmacro-prefix-map=zephyr=ZEPHYR_BASE -ffunction-sections -fdata-sections -std=c99 -nostdinc -MD -MT zephyr/CMakeFiles/offsets.dir/arch/riscv/core/offsets/offsets.c.obj -MF zephyr/CMakeFiles/offsets.dir/arch/riscv/core/offsets/offsets.c.obj.d -o zephyr/CMakeFiles/offsets.dir/arch/riscv/core/offsets/offsets.c.obj   -c zephyr/arch/riscv/core/offsets/offsets.c
In file included from ../include/sys/atomic.h:468,
                 from ../include/kernel_includes.h:21, 
                 from ../include/kernel.h:17,
                 from zephyr/arch/riscv/core/offsets/offsets.c:16:
zephyr/include/generated/syscalls/atomic.h:25:19: error: conflicting types for 'atomic_cas'
 static inline int atomic_cas(atomic_t * target, atomic_val_t old_value, atomic_val_t new_value)
                   ^~~~~~~~~~
In file included from ../include/kernel_includes.h:21, 
                 from ../include/kernel.h:17,
                 from zephyr/arch/riscv/core/offsets/offsets.c:16:
../include/sys/atomic.h:44:20: note: previous definition of 'atomic_cas' was here
 static inline bool atomic_cas(atomic_t *target, atomic_val_t old_value,

QEMUの起動コマンド

$ /usr/bin/qemu-system-riscv32 -nographic -machine sifive_e -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel zephyr/build/zephyr/zephyr.elf -s -S

0x1000にあるコード

   0x1000:      lui     t0,0x20400
=> 0x1004:      jr      t0
   0x1008:      unimp
   0x100a:      unimp

0x1000にあるコード

$ riscv64-zephyr-elf-readelf -a build/zephyr/zephyr.elf  | less

...

Section Headers:
  [Nr] Name              Type            Addr     Off    Size   ES Flg Lk Inf Al
  [ 0]                   NULL            00000000 000000 000000 00      0   0  0
  [ 1] vector            PROGBITS        20400000 000094 000010 00  AX  0   0  4
  [ 2] exceptions        PROGBITS        20400010 0000a4 000258 00  AX  0   0  4
  [ 3] text              PROGBITS        20400268 0002fc 002ad4 00  AX  0   0  4
  [ 4] sw_isr_table      PROGBITS        20402d3c 002dd0 000200 00  WA  0   0  4
  [ 5] devconfig         PROGBITS        20402f3c 002fd0 000060 00   A  0   0  4
  [ 6] rodata            PROGBITS        20402f9c 003030 000215 00   A  0   0  4
  [ 7] datas             PROGBITS        80000000 003248 000018 00  WA  0   0  4
  [ 8] initlevel         PROGBITS        80000018 003260 000060 00  WA  0   0  4
  [ 9] _k_mutex_area     PROGBITS        80000078 0032c0 000014 00  WA  0   0  4
  [10] bss               NOBITS          80000090 0032e0 00013c 00  WA  0   0  8
  [11] noinit            NOBITS          800001d0 0032e0 000e00 00  WA  0   0 16

...

0x20400000にあるコード

zephyr/zephyr.elf:     file format elf32-littleriscv


Disassembly of section vector:

20400000 <__start>:

        /*
         * Set mtvec (Machine Trap-Vector Base-Address Register)
         * to __irq_wrapper.
         */
        la t0, __irq_wrapper
20400000:       00000297                auipc   t0,0x0
20400004:       01028293                addi    t0,t0,16 # 20400010 <__irq_wrapper>
        csrw mtvec, t0
20400008:       30529073                csrw    mtvec,t0

        /* Jump to __initialize */
        tail __initialize
2040000c:       4b40106f                j       204014c0 <__initialize>

ボード用のデバイスツリーのchosenノード

        chosen {
                zephyr,console = &uart0;
                zephyr,shell-uart = &uart0;
                zephyr,sram = &dtim;
                zephyr,flash = &flash0;
        };

Flashのサイズを見ている箇所

# zephyr/scripts/dts/gen_defines.py

...

def write_flash_node(edt):
    # Writes output for the top-level flash node pointed at by
    # zephyr,flash in /chosen

    node = edt.chosen_node("zephyr,flash")

    out_comment(f"/chosen/zephyr,flash ({node.path if node else 'missing'})")

    if not node:
        # No flash node. Write dummy values.
        out("FLASH_BASE_ADDRESS", 0)
        out("FLASH_SIZE", 0)
        return

    if len(node.regs) != 1:
        err("expected zephyr,flash to have a single register, has "
            f"{len(node.regs)}")

    if node.on_bus == "spi" and len(node.bus_node.regs) == 2:
        reg = node.bus_node.regs[1]  # QSPI flash
    else:
        reg = node.regs[0]

    out("FLASH_BASE_ADDRESS", hex(reg.addr))
    if reg.size:
        out("FLASH_SIZE", reg.size//1024)

...

エントリーポイントを決めている箇所

// zephyr/include/arch/riscv/common/linker.ld

MEMORY
{
#ifdef CONFIG_XIP
    ROM (rx)  : ORIGIN = DT_FLASH_BASE_ADDRESS, LENGTH = KB(DT_FLASH_SIZE)
#endif
    RAM (rwx) : ORIGIN = CONFIG_SRAM_BASE_ADDRESS, LENGTH = KB(CONFIG_SRAM_SIZE)
    /* Used by and documented in include/linker/intlist.ld */
    IDT_LIST  (wx)      : ORIGIN = 0xFFFFF7FF, LENGTH = 2K
}

crosstool-NG RISC-V版のビルド

$ ./ct-ng menuconfig

Target options  --->
  Target Architecture (riscv)  --->
  [*] Build a multilib toolchain (READ HELP!!!)
  Bitness: (64-bit)  --->
  (rv32ima) Architecture level
  (ilp32) Generate code for the specific ABI

Toolchain options  --->
  (zephyr) Tuple's vendor string

Debug facilities  --->
  [*] gdb  --->
    [*]     Build a static cross gdb

ZephyrのCMakeスクリプト

zephyr/cmake/toolchain/xtools/target.cmake

set(CROSS_COMPILE_TARGET_riscv   riscv64-zephyr-elf)

set(CROSS_COMPILE_TARGET ${CROSS_COMPILE_TARGET_${ARCH}})

-    list(APPEND TOOLCHAIN_C_FLAGS -mabi=ilp32 -march=rv32ima)
+    list(APPEND TOOLCHAIN_C_FLAGS -mabi=ilp32f -march=rv32gc)

環境変数のセットアップとcmakeの実行

$ cat ~/.zephyrrc 

export ZEPHYR_TOOLCHAIN_VARIANT=xtools
export XTOOLS_TOOLCHAIN_PATH=/home/katsuhiro/x-tools

$ cd zephyr
$ source zephyr-env.sh

$ mkdir build
$ cd build

$ cmake -G Ninja -DBOARD=qemu_riscv32 ../samples/hello_world/

-- Zephyr version: 2.1.99
-- Found PythonInterp: /usr/bin/python3 (found suitable version "3.7.6", minimum required is "3.6")
-- Selected BOARD qemu_riscv32
-- Loading /home/katsuhiro/share/projects/oss/zephyr/boards/riscv/qemu_riscv32/qemu_riscv32.dts as base
Devicetree configuration written to /home/katsuhiro/share/projects/oss/zephyr/build/zephyr/include/generated/devicetree.conf
Parsing /home/katsuhiro/share/projects/oss/zephyr/Kconfig
Loaded configuration '/home/katsuhiro/share/projects/oss/zephyr/boards/riscv/qemu_riscv32/qemu_riscv32_defconfig'
Merged configuration '/home/katsuhiro/share/projects/oss/zephyr/samples/hello_world/prj.conf'
Configuration saved to '/home/katsuhiro/share/projects/oss/zephyr/build/zephyr/.config'
-- The C compiler identification is GNU 8.3.0
-- The CXX compiler identification is GNU 8.3.0
-- The ASM compiler identification is GNU
-- Found assembler: /home/katsuhiro/x-tools/riscv64-zephyr-elf/bin/riscv64-zephyr-elf-gcc
-- Cache files will be written to: /home/katsuhiro/.cache/zephyr
-- Configuring done
-- Generating done
-- Build files have been written to: /home/katsuhiro/share/projects/oss/zephyr/build

Zephyr OS実行

$ /usr/bin/qemu-system-riscv32 -nographic -machine sifive_e -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel /home/katsuhiro/share/projects/oss/zephyr/build/zephyr/zephyr.elf -s -S

(gdbからcontinueをすると、下記が出力される)

*** Booting Zephyr OS build zephyr-v2.1.0-1471-g7e7a4426d835  ***
Hello World! qemu_riscv32

GDB接続

$ riscv64-zephyr-elf-gdb

GNU gdb (crosstool-NG 1.24.0.60-a152d61) 8.3.1
Copyright (C) 2019 Free Software Foundation, Inc.

...

(gdb) set arch riscv:rv32
The target architecture is assumed to be riscv:rv32

(gdb) target remote localhost:1234

Remote debugging using localhost:1234
warning: No executable has been specified and target does not support
determining executable automatically.  Try using the "file" command.
0x00001000 in ?? ()

(gdb) continue

Continuing.

GCC HEAD (GCC 10.0相当) でglibc 2.28をビルドするとコンパイルエラー

./../include/libc-symbols.h:534:26: error: '__EI___errno_location' specifies less restrictive attributes than its target '__errno_location': 'const', 'nothrow' [-Werror=missing-attributes]
  534 |   extern __typeof (name) __EI_##name \
      |                          ^~~~~

GCC 8.3でglibc 2.30をビルドするとリンクエラー

crosstool-builder-new-aarch64/buildroot/lib/gcc/aarch64-unknown-linux-gnu/8.3.0/../../../../aarch64-unknown-linux-gnu/bin/ld: crosstool-builder-new-aarch64/build/glibc/support/links-dso-program.o: Relocations in generic ELF (EM: 62)
crosstool-builder-new-aarch64/buildroot/lib/gcc/aarch64-unknown-linux-gnu/8.3.0/../../../../aarch64-unknown-linux-gnu/bin/ld: crosstool-builder-new-aarch64/build/glibc/support/links-dso-program.o: Relocations in generic ELF (EM: 62)
...

glibc/support下に生成されたオブジェクト

build/glibc/support$ file *.o

echo-container.o:    ELF 64-bit LSB relocatable, ARM aarch64, version 1 (SYSV), with debug_info, not stripped
links-dso-program.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), with debug_info, not stripped    ★★★★これ★★★★
shell-container.o:   ELF 64-bit LSB relocatable, ARM aarch64, version 1 (SYSV), with debug_info, not stripped
stamp.o:             empty
test-container.o:    ELF 64-bit LSB relocatable, ARM aarch64, version 1 (SYSV), with debug_info, not stripped
true-container.o:    ELF 64-bit LSB relocatable, ARM aarch64, version 1 (SYSV), with debug_info, not stripped

glibcのビルドエラーをあえて無視するパッチ

diff --git a/Makeconfig b/Makeconfig
index fd36c58c04..106688e210 100644
--- a/Makeconfig
+++ b/Makeconfig
@@ -916,7 +916,8 @@ ifeq	"$(strip $(+cflags))" ""
 endif	# $(+cflags) == ""
 
 +cflags += $(cflags-cpu) $(+gccwarn) $(+merge-constants) $(+math-flags) \
-	   $(+stack-protector)
+	   $(+stack-protector) \
+	   -Wno-zero-length-bounds -Wno-array-bounds -Wno-maybe-uninitialized
 +gcc-nowarn := -w
 
 # Each sysdeps directory can contain header files that both will be

glibcのsupport/links-dso-programをビルドさせないパッチ

diff --git a/support/Makefile b/support/Makefile
index ab66913a02..19c3de2043 100644
--- a/support/Makefile
+++ b/support/Makefile
@@ -184,12 +184,12 @@ CFLAGS-support_paths.c = \
 		-DSBINDIR_PATH=\"$(sbindir)\" \
 		-DROOTSBINDIR_PATH=\"$(rootsbindir)\"
 
-ifeq (,$(CXX))
-LINKS_DSO_PROGRAM = links-dso-program-c
-else
-LINKS_DSO_PROGRAM = links-dso-program
-LDLIBS-links-dso-program = -lstdc++ -lgcc -lgcc_s $(libunwind)
-endif
+#ifeq (,$(CXX))
+#LINKS_DSO_PROGRAM = links-dso-program-c
+#else
+#LINKS_DSO_PROGRAM = links-dso-program
+#LDLIBS-links-dso-program = -lstdc++ -lgcc -lgcc_s $(libunwind)
+#endif
 
 ifeq (yes,$(have-selinux))
 LDLIBS-$(LINKS_DSO_PROGRAM) += -lselinux

1番目の実験: あれ？バッファオーバーランは…？

0: 0 0 0
1: 0 1 0
2: 0 2 0
3: 0 3 0
4: 0 4 0
...
47: 0 47 0
48: 0 48 0
49: 0 49 0
1770: 1770

2番目の実験: 10行目のprintfを有効、突然のバッファオーバーラン

0x7ffd9b348a10 0x7ffd9b348ae0 0x7ffd9b348bb0
0: 0 0 52
1: 0 1 53
2: 0 2 54
3: 0 3 55
4: 0 4 56
...
45: 0 45 0
46: 0 46 0
47: 0 47 0
48: 0 48 0
49: 0 49 0
1770: 1770

3番目の実験: ループを1つにするとクラッシュ

0: 0 0 0
1: 0 1 0
2: 0 2 0
3: 0 3 0
4: 0 4 0
...
45: 0 45 0
46: 0 46 0
47: 0 47 0
48: 0 48 0
49: 0 49 0
Segmentation fault

実験用ソースコード

#include <stdio.h>
#include <string.h>

int undefined()
{
	int guard1[50];
	int array[50];
	int guard2[50];
	int sum = 0, i;

	memset(guard1, 0, sizeof(guard1));
	memset(guard2, 0, sizeof(guard2));
	//printf("%p %p %p\n", &guard1[0], &array[0], &guard2[0]);

	for (i = 0; i < 60; i++) {
		array[i] = i;
	}

	for (i = 0; i < 60; i++) {
		sum += array[i];
	}

	for (i = 0; i < 50; i++) {
		printf("%2d: %d %d %d\n", i, guard1[i], array[i], guard2[i]);
	}

	return sum;
}

int main(int argc, char *argv[])
{
	int sum1 = 0, sum2 = 0, i;

	sum1 = undefined();

	for (i = 0; i < 60; i++) {
		sum2 += i;
	}

	printf("%d: %d\n", sum1, sum2);

	return 0;
}